INTEX AQUA FILLER 2110-00
Water-soluble 1C spray filler for industrial surface treatment
- 1-component
- Water-borne
- Filler
INTEX AQUA FILLER 2110-00 is a water-soluble 1C spray filler with excellent filling properties and sandability. The product was designed especially for the wood processing industry.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
| Volatile organic compound (VOC) | abt. 40 g/l |
|---|---|
| Theoretical spreading rate | 250 g/m²; 4 m²/kg |
| Density | abt. 1.33 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 4 hours |
| Clean up | Wash the equipment immediately after use. Water, VERDÜNNER 1300-98. |
| Colours | White. |
| Safety markings | See safety data sheet. |