PAINTING SYSTEM
C106.6 HYDRO WAX
Partial varnishing is not recommended
Pretreatment
Sand the wood and remove dust, dirt and other loose material from the surface.
Application
Fill the gaps with GAP Parquet putty. Sand and clean the puttied areas. Apply 3 coats of HYDRO WAX Polyurethane coating. Intersand properly between second and third layer.
products
HYDRO WAX
1-component coating for parquet and wooden floors. Approximately 30% of the total carbon content is bio-based.
GAP
For filling gaps in parquet and wooden floors before sanding and applying water-borne primer or topcoat.
More specific product information in technical data sheet. Painting system search recommends products based on the information you provide and does not take into account any specific needs of the site, e.g. the quality of the material to be painted or the properties of the previous paint. The main responsibility lies with the designer.
In case of doubt, please contact your local Teknos team.