TEKNOSPRO MAX+
Filling universal filler
- Filler
Ready-to-use, white, water-borne filler for spray application.
Used for overall skimming of walls and ceilings in dry interior areas when especially good filling properties are required. The substrate can be gypsum, fibre board, concrete, lightweight concrete, plaster etc.
TEKNOSPRO MAX+ has excellent filling properties. TEKNOSPRO MAX+ gives a very smooth surface, which is easy to sand. The sanded surface is ready to be painted.
Technical data sheet
Other product specific documents
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Brittle surfaces and untreated wooden surfaces must be primed before the filler is applied.
Application
Apply the filler with a paste-spraying gun. Recommended nozzle size for airless spray is 0.039 - 0.045". The number of layers is dependent on the surface roughness. The dried filler can be painted or wall-papered. Before wall-papering the filler surfaces must be pre-glued. The use of protective mask for eyes and face is recommended when sanding the filler.
Application conditions
The surface to be treated must be dry. The temperature of the air, the surface and the filler shall be above +5°C and the relative humidity of the air below 80% during the time of application and drying.
Storage
To be stored in a cool place. Must not freeze. Storage stability is 1 year in unopened package.
| Weight solids | abt. 47 % by weight |
|---|---|
| Volatile organic compound (VOC) | The product is not included in the EU VOC directive. |
| Layer thickness | 0 - 8 mm |
| Density | abt. 1 g/ml |
| Particle size | 0.35 |
| Clean up | Water. |
| Colours | White. |
| Packages | 15 L |
| Safety markings | See safety data sheet. CHEMICAL PROPERTIES AND SAFETY The product is not classified as hazardous according to Regulation (EC) 1272/2008. Recommended safety precautions when using the product: Avoid unnecessary skin contact. Use work clothes to protect against paint splashes. Use eye protection to protect againts paint splashes. During spray application avoid breathing spray mist. Use respirator, filter type A P. More information and Safety data sheet: Product's product page www.teknos.com |
| Approvals & certificates | CE marking,M1 classification,Nordic Ecolabel |