JRM-EDGES
Top coat for protecting wood ends
A water-borne acrylate based paint.
For painting and protecting edges of building timber: building logs, pillars and gluelam beams. Forms flexible and weather resistant film. Areas of use are buildings that are under construction or already completed. For outdoor and indoor use. Paint is applied locally on the edges of logs and beams. To be used colourless or tinted.
The paint has very low water permeability. Reduces changes in the moisture content of solid wood edges. Effectively reduces cracking.
Surface preparation
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
Application
Before use stir the paint thoroughly. Apply the paint by brush. Apply the paint in 2 or 3 coats. Each coat must be allowed to dry before a new coat is applied.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%.
Storage
Must not freeze. The best storage temperature is between +10 - +25°C.
| Solids | abt. 43 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (kat A/d): 130 g/l. The product's VOC: max. 130 g/l. |
| Gloss | Semi-matt |
| Tinting system | Teknomix |
| Drying time – dust free | after 1 h |
| Drying time – touch dry | after 1 h 20 min |
| Drying time - overcoatable | after 2 h |
| Thinner | Water |
| Clean up | Water. |
| Packages | Base paints 1 and 3: 0,9 L, 2,7 L |
| Safety markings | See Safety Data Sheet. |