HYDROPUR 2K COLOR 7516-15
Water-soluble, textured 2C topcoat for interior and exterior use
- 2-component
- Water-borne
- Topcoat
HYDROPUR 2K COLOR 7516 is a fast-drying, water-soluble, textured 2C top coat. The coating is very weather-resistant. The product is characterised by its high elasticity and good block resistance.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Effect coatings should only be applied by air atomisation, e.g. with a gravity feed gun or a low-pressure double diaphragm pump.
Please refer to the instructions in the process data sheet "Large-area coatings with effect coatings" (VTM 4126).
Technical requirement: Adhesive strength according to DIN EN ISO 2409; Gt 0
| Weight solids | abt. 41 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 38 g/l |
| Hardener | Comp. B: HYDROPUR 7515-99 |
| Gloss | Semi-matt |
| Tinting system | Teknocolor |
| Density | abt. 1.2 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 90 minutes |
| Drying time – through-dry | after 24 hours |
| Drying time - overcoatable | after 3 hours |
| Clean up | Wash the equipment immediately after use. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |