DRYWOOD OPTISEALER TR
Water-borne primer
- Low-temperature curing
- Water resistant
- Water-borne
- Sealer
DRYWOOD OPTISEALER TR is a translucent, semi-matt, water-borne industrial primer for interior and exterior wooden joinery and other wood constructions.
DRYWOOD Optisealer can be applied by Airmix (Aircoat) or airless by hand or in automatic spraying equipment. DRYWOOD Optisealer will typically be applied on hardwood, which for non-durable hardwood has been pretreated with a Wood Preservative. Exterior durability of coating systems including DRYWOOD Optisealer is typically documented according to BRL0814/0817.
DRYWOOD OPTISEALER TR has a good penetration into the wood and good sealing properties on various wood species such as merbau and sapupira. The product has nice filling and leveling properties.
Technical data sheet
Surface preparation
The wooden surface must be dry, carefully sanded and cleaned from dust and other impurities. The moisture content of the wood should be approx. 13% and should not exceed 15%.
Application conditions
Stir thoroughly before use.
In general, application of one or two layers provides a smooth and well sealed surface. Next layer can be applied after 4 h (for better sealing properties at least 16 h).
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use. Must not freeze.
| Solids | abt. 37 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 7 g/l |
| Gloss | Semi-matt |
| Tinting system | Teknocolor |
| Theoretical spreading rate | Approx. 7.5 m²/l at 50 µm dry film thickness. |
| Density | abt. 1.15 g/ml |
| Drying time – through-dry | Min. 48 h (100 μm dry film thickness) See KOMO certificate for drying conditions or min. 48 h at min. 15 °C and max. 60 % R.H. at 100 μm dry film thickness. Next layers of different products can be applied after at least 16 h drying at min. 15 °C and max. 60 % R.H. after light sanding. |
| Drying time - overcoatable | At least 16 hours. Adviced to lightly sand surface before applying the next layer. |
| Thinner | Water. |
| Clean up | Clean equipment after use with water. |
| Colours | Tintable in almost all translucent colours. Base T (translucent colours). |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | KOMO Certificate BRL 0814 (32998),KOMO Certificate BRL 0817 (33135) |