BIORA BALANCE
Full-matt interior paint
- Water-borne
BIORA BALANCE is a full-matt water-borne acrylate dispersion paint, for dry interior areas.
Suited for use on interior walls and ceilings in e.g. nurseries, bedrooms and lounges and other similar places. BIORA BALANCE can be applied onto concrete, plaster, filler, brick and building board surfaces. BIORA BALANCE is also suitable for repainting old alkyd and dispersion paint coats.
Technical data sheet
Safety data sheet
Other product specific documents
Product colour chart
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.
Application
Stir thoroughly before use. Apply once or twice. Reserve a sufficient amount of paint in the same vessel for each uniform surface. Colour differences will thus be avoided.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.
Maintenance
The final forming of the film takes approx. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the surface must be treated with care.
The surface can be cleaned by light wiping. Use a damp cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion.
Storage
Must not freeze.
Suitable airless nozzle size 0.017 - 0.021".
| Solids | abt. 37 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (cat A/a): 30 g/l. The product's VOC: max. 30 g/l. |
| Gloss | Full-matt |
| Tinting system | Teknomix |
| Density | abt. 1.4 g/ml |
| Practical spreading rate | Previously painted surface: 7 - 10 m²/l. Filler and wood fibre board: 6 - 8 m²/l. Concrete and plastered surface: 4 - 7 m²/l. |
| Drying time – dust free | ½ h |
| Drying time - overcoatable | 1 h |
| Thinner | Water. |
| Clean up | Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use. |
| Colours | Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card. |
| Packages | Base paint 1: 0.9 l, 2.7 l, 9 l, 18 l. Base paint 3: 0.9 l, 2.7 l, 9 l. |
| Safety markings | See safety data sheet. CHEMICAL PROPERTIES AND SAFETY The product is not classified as hazardous according to Regulation (EC) 1272/2008. Recommended safety precautions when using the product: Avoid unnecessary skin contact. Use work clothes to protect against paint splashes. Use eye protection to protect againts paint splashes. During spray application avoid breathing spray mist. Use respirator, filter type A P. More information and Safety data sheet: Product's product page www.teknos.com |
| Approvals & certificates | Allergy label (Finland),M1 classification,Nordic Ecolabel,Finnish Key Flag |
| Gloss value | 2- 4 |