ALPOCRYL HR 5360-40

Solvent-based 2C enamel coating for interior use

  • 2-component
  • Solvent-borne
  • Topcoat

ALPOCRYL HR 5360 is a particularly fast-drying, solvent-based, 2C enamel coating with excellent adhesion and high covering power. The coating is very weather-resistant and is also resistant to household chemicals and mechanical stress. The special IR-reflective composition reduces heating caused by solar radiation.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Relative air humidity max. 80%. The weather resistance rating applies to countries with Central European climate and up to 1000 metres altitude (m.a.s.l.).

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

PVC profiles: Please refer to the instructions in the process data sheet "Instructions for PVC profiles with ALPOCRYL DP 5520, HR 5360 and LE 5393" (VTM 2519). Aluminium and galvanised substrates: ALPOTECT PRIMER 5162-00 Steel: ALPOTECT PHOSPHATGRUND 5100-00
Weight solids abt. 44 % by weight
Volatile organic compound (VOC) abt. 602 g/l
Pot life 8 h (+23 °C)
Mixing ratio 10:1 by volume (comp. A : comp. B)
Hardener Comp. B: UNIPUR 279 1910-99
Tinting system Largo
Theoretical spreading rate 96 g/m²; 10.4 m²/kg
Density abt. 1.16 g/ml
Drying time – dust free after 10 minutes
Drying time – touch dry after 30 minutes
Drying time – through-dry after 10-14 days
Drying time - overcoatable after 2 hours
Thinner VERDÜNNER 1300-98, VERDÜNNER 0950-98.
Clean up Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98.
Colours Available in all RAL and NCS-S colours or at your request.
Safety markings See safety data sheet.
Gloss value 40