ALPOCRYL EISENGLIMMER 5381-30
Solvent-based, textured 2C top coat for interior use
- 2-component
- Solvent-borne
- Topcoat
ALPOCRYL EISENGLIMMER 5381 is a particularly fast-drying, solvent-based 2C enamel coating for decorative use. The coating is very weather-resistant and is also resistant to household chemicals and mechanical stress.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, sandblast
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Effect paints should only be applied using air atomisation, e.g. with a flow cup gun or a low-pressure double diaphragm pump.
Please observe the technical data sheet ‘Large-area coatings with effect paints’ (VTM 4126).
| Weight solids | abt. 46 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 648 g/l |
| Pot life | 24 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 140 g/m²; 7.1 m²/kg |
| Density | abt. 1.26 g/ml |
| Drying time - overcoatable | after 2 hours |
| Thinner | VERDÜNNER 0950-98, VERDÜNNER 1300-98. |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |