Polyurea Coating Systems for Industrial Tanks and Secondary Containments
INDUSTRIAL TANKS AND CONTAINERS
Steel or concrete industrial tanks and containers with continuous water or chemical immersion. Further information on suitable chemicals available from Teknos representatives.
System suitable for water immersion – max. 90°C (clean water).
System document:
PUA300-S2 Teknopur 300-800 Steel 2
System versions:
PUA300-S1a
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 3000 μm |
PUA300-S1b
System with a thicker TEKNOPUR film for heavier stress or longer service intervals.
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 3 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 4500 μm |
PUA300-S1c
When a precise colour or UV protection is desired the system can be overcoated with solvent-borne TEKNODUR 0090 polyurethane paint.
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | 1 x 40 μm |
| Total film thickness | 3040 μm |
Further information on suitable chemicals available from Teknos representatives.
System document:
PUA300-S2 Teknopur 300-800 Steel 2
System versions:
PUA300-S1a
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 3000 μm |
PUA300-S1b
System with a thicker TEKNOPUR film for heavier stress or longer service intervals.
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 3 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 4500 μm |
PUA300-S1c
When a precise colour or UV protection is desired the system can be overcoated with solvent-borne TEKNODUR 0090 polyurethane paint.
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | 1 x 40 μm |
| Total film thickness | 3040 μm |
System suitable for water immersion – max. 90°C (clean water).
System document:
PUA300-C2 Teknopur 300-800 Concrete 2
System versions:
PUA300-C2a
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 3000 μm |
PUA300-C2b
System with a thicker TEKNOPUR film for heavier stress or longer service intervals.
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 3 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 4500 μm |
PUA300-C2c
When a precise colour or UV protection is desired the system can be overcoated with solvent-borne TEKNODUR 0090 polyurethane paint.
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | 1 x 40 μm |
| Total film thickness | 3040 μm |
System suitable for water immersion – max. 90°C (clean water).
System document:
PUA300-C2 Teknopur 300-800 Concrete 2
System versions:
PUA300-C2a
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 3000 μm |
PUA300-C2b
System with a thicker TEKNOPUR film for heavier stress or longer service intervals.
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 3 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 4500 μm |
PUA300-C2c
When a precise colour or UV protection is desired the system can be overcoated with solvent-borne TEKNODUR 0090 polyurethane paint.
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | 1 x 40 μm |
| Total film thickness | 3040 μm |
SECONDARY CONTAINMENTS
Industrial chemical secondary containment pools, where chemical exposure is occasional and short-term. Further information on suitable chemicals available from Teknos representatives.
System document:
PUA300-S2 Teknopur 300-800 Steel 2
System versions:
PUA300-S1a
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 3000 μm |
PUA300-S1b
System with a thicker TEKNOPUR film for heavier stress or longer service intervals.
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 3 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 4500 μm |
PUA300-S1c
When a precise colour or UV protection is desired the system can be overcoated with solvent-borne TEKNODUR 0090 polyurethane paint.
| Coating | |
| TEKNOMASTIC 80 PRIMER | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | 1 x 40 μm |
| Total film thickness | 3040 μm |
System document:
PUA300-C2 Teknopur 300-800 Concrete 2
System versions:
PUA300-C2a
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 3000 μm |
PUA300-C2b
System with a thicker TEKNOPUR film for heavier stress or longer service intervals.
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 3 x 1500 μm |
| TEKNODUR 0090 | - |
| Total film thickness | 4500 μm |
PUA300-C2c
When a precise colour or UV protection is desired the system can be overcoated with solvent-borne TEKNODUR 0090 polyurethane paint.
| Coating | |
| TEKNOFLOOR PRIMER 306F-01 | priming |
| TEKNOPUR 300-800 | 2 x 1500 μm |
| TEKNODUR 0090 | 1 x 40 μm |
| Total film thickness | 3040 μm |
To select a final suitable system for your project, please contact your local Teknos Service Team.