Teknos wind turbine blade coatings

Teknos has developed paints and coatings specially for wind turbine blades. Our turbine blade coating product family consists of a full range of products, from priming to finishing paints, and putties as well as repair solution for rotor blade leading edges.

Teknos’ advanced coating technologies enhance the longevity of wind turbine blades and enable short process times, higher productivity and considerable cost-out. These paint systems for wind turbine blades have been proven in different environment to perform in atmospheres ranging from challenging to harsh.

Our service includes the competent and committed support from our experienced application technicians.

Blade coatings Leading edge protection

BLADE COATINGS - TEKNODUR 3572 high-performance paint system

Applications
Surface of wind turbine blades or other fiber glass components.

Application conditions
Humidity must be below 70% RH at ambient temperature (15– 30°C) or at elevated temperatures.

ProductS

TEKNOPOX 2118 Putty
TEKNODUR 3572-09 Primer
TEKNODUR 3574 Pinhole Filler
TEKNODUR 3572-02 Topcoat
TEKNOSOLV 9521/9526 Thinners
TEKNOCLEAN 6496 for 2K-equipment cleaning

Features

Excellent adhesion and pull-off strength
High solid content and low VOC emissions
Designed for fast application with 2K-equipment
Smooth surface with desired gloss level
Excellent weather and abrasion resistance

Benefits

Significantly improved application efficiency
No need for elevated curing temperature
Fast drying in normal room temperature
Extended blade and film life cycle
Suitable for different environments

**Properties of TEKNODUR 3572-02 Topcoat**
Test	Test method	Result
Colour		As required
Gloss	ISO 2813	15-30
Dry time (+23°C)	To touch	1 hour
	To handle	2 hours
	To service	3 hours
Heating (+40°C)	To handle	No need
Dry Film Thickness area		70-150 µm
Density	EN ISO 2811-1	1.45 g/ml
Adhesion	Pull-off	≥ 8 Mpa

Leading edge protection

6 TIMES FASTER REPAIR SOLUTION FOR ROTOR BLADE REPAIR

TEKNOBLADE REPAIR 9000 is a solvent-free coating with 100% proportion of solids and no VOCs. It can be applied with a coat thickness of between 2000 μm - 3000 μm (2-3 mm) and it forms a protective elastic layer. The product can be used both for a preventive leading edge protection (LEP) on new rotor blades and for rotor blade repair. While a 3-coat system is required in conventional systems, TEKNOBLADE REPAIR 9000 is capable of repairing damaged edges with just one single coat. And the edge protection withstands exposure for even longer. A true revolution in rotor blade repair!

TEKNOBLADE REPAIR 9000

One product solution that has filler and LEP in one
The solution is supplied in complete kits of 6 or 24 sets that include cartridge (components A+B), mixer, spreader and squeegee