1. Teknos Americas
  2. Industrial
  3. Products
  4. Global products
  5. INFRALIT PE 8350-07

INFRALIT PE 8350-07

Polyester powder

»
  • Powder coating

INFRALIT PE 8350-07 is a TGIC-free powder coating based on solid polyester resin. At elevated temperature the powder will melt, cure and form the final paint film.

Suitable for objects which require a weather-resistant coating, especially for coating of aluminium objects. INFRALIT PE 8350-07 forms a mechanically and chemically resistant paint film which has good corrosion resistance and good colour stability and gloss retention also in outdoor conditions. INFRALIT PE 8350-07 is a metallic or pearlescent colour. APPROVALS: GSB material approval. Registration number 145b, Cl. ”Florida 1 year”. Qualicoat approval number P-0412, Cat. 3, Cl. 1 Quality-System Approval (Module D) number EUFI29-22005225-MED and EC Type-Examination Certificate (Module B) number EUFI29-19003427-MED according to Marine Equipment Directive (2014/90/EU). EN 45545-2:2013+A1:2015 Fire protection on railway vehicles. Requirement sets R1, R7, R10 & R17 - Hazard levels HL1, HL2 & HL3. EN 13501-1 : 2007 + A1:2009 Fire classification of construction products and building elements - Part 1: A2 - s1- d0. NFPA 130:2020 Standard for Fixed Guideway Transit and Passenger Rail Systems, Chapter 8 - Vehicles - ASTM E 162:2016 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source - ASTM E 662:2017 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials The product has been classified to Group M1 in Emission Classification of building materials.

Surface preparation

STEEL SURFACES: Remove grease and dirt. After that blast-cleaning at least to preparation grade Sa 2½ (ISO 8501-1) and/or a suitable chemical pretreatment. ALUMINIUM SURFACES: Remove grease and dirt. After that chromating or alternatively a suitable chemical pretreatment. HOT-DIP-GALVANIZED AND ZINC-ELECTROPLATED SURFACES: Remove grease, dirt and white rust by e.g. alkali wash. Depending on exposure conditions, chromating or alternatively a suitable chemical pretreatment is also required.

Storage

The storage life is minimum 18 months in dry and cool conditions when the temperature during storage and transportation is max. +25°C. Take special care during high temperature seasons. Avoid storing close to heat sources and heaters in trucks and storages. Don’t store in direct sunlight. The recommended expiry date of the powder coating that has been stored according to the instructions is shown on the package label.
Practical spreading rate 6 - 10 m²/kg depending on the film thickness.
Spraying TRIBO/CORONA
Curing time 10-25 min/180°C (metal temperature)
Colours The colours that are available directly from stock are the pearlescent shades according to RAL-CLASSIC Colour Card. Other metallic and pearlescent shades by agreement.
Packages 15 kg or 20 kg according to the density of the powder.
Safety markings See safety data sheet. The powder itself is non-flammable, but with air it can form an explosive mixture that in presence of adequate ignition energy ignites. The lower explosion limit of typical powder coatings is between 20 g/m³ and 80 g/m³ (CEPE, Safe Powder Coating Guideline 8th Edition, 2020). Ventilation of the spray booth should be adjusted so that the concentration of powder in the air is less than 50% of the lower explosive limit value. On calculation of the powder concentration in the spray booth, the powder deposited on the workpiece is not taken into account. In order to avoid the discharge of powder from the booth into adjacent working spaces, the speed of air flow in the apertures of the booth must not fall below 0.5 m/s. Spray painters should wear dust masks and protective gloves. Any spatter of powder on the skin should be washed off with water and soap.
Approvals & certificates ASTM E 662:2017,ASTM E 162:2016,EN 13501-1,EN 45545-2,GSB Florida 1 approval,M1 classification,Marine Equipment Approval (Module D),Marine Equipment Approval (Module B),Qualicoat approval, class 1
Gloss value 65-85