1. Teknos Americas
  2. Industrial
  3. Products
  4. Global products
  5. TEKNOSAFE FLAME GUARD 2457-10

TEKNOSAFE FLAME GUARD 2457-10

Intumescent primer and paint

»
  • Water-borne
  • Paint
  • Primer

TEKNOSAFE FLAME GUARD 2457-10 is a water-borne intumescent primer and paint for interior solid wood panelling and cladding, and wood-based panels. Substrate: Solid wood or wood-based panels with thickness > 8 mm and density ≥ 338 kg/m³ when taken in conjunction with the relevant fire classification report.

Used as an industrial primer or paint as part of a system called Teknos FR Panel with TEKNOSAFE FLAME PROTECT 2458-00 to improve “reaction to fire” (EN 13501-1) of interior wooden surfaces see https://www.teknos.com/products/teknosafe-flame-guard-2457-10/. Before using the product, Teknos should be contacted to check the suitability of the product for the object in question. Fire-retardant performance has been classified according to B-s1, d0 EN 13501-1 (SBI test). Durability classes of reaction to fire performance, of fire-retardant wood-based product in end use applications according to EN 16755 - DRF class INT1 and INT2.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 10% and should not exceed 12%.

Application conditions

The temperature of the air, the surface and the paint shall be above +10°C and the relative humidity of the air below 80% during the time of application and drying. The best result is achieved when the temperature of the air is between +23°C and +38°C, the relative humidity of the air is 50-70% and the ventilation good. Stir the paint thoroughly before use, preferably using mechanical stirring. After on-site cutting the specified loading rate must be re-instated. For all coated solid wood or wood-based panels, a non-marking protective layer of minimum 1.5 mm thickness (e.g., polyethylene film) is recommended to be used between coated surfaces.

Storage

Must not freeze. The best storage temperature is +10°C - +25°C.

Apply industrially.
Volatile organic compound (VOC) abt. 6 g/l
Gloss Matt
Tinting system Teknocolor
Theoretical spreading rate The core classification is made with ≥ 250 g/m² TEKNOSAFE FLAME GUARD 2457-10 with or without ≤ 100 g/m² TEKNOSAFE FLAME PROTECT 2458-00 or in conjunction with additional relevant fire classification reports.
Drying time – touch dry 20-30 min.
Thinner Water.
Clean up Water.
Colours Base 1 or Base 3 (all opaque colours). All tinting recipes are developed by Teknos Shade service.
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.
Approvals & certificates A+ Émissions l'air intérieur (France)