PENTOL UV PROTECT PLUS 0783-30
Water-soluble light and moisture protection for interior and protected exterior use
- 1-component
- Water-borne
- Coating
PENTOL UV PROTECT PLUS 0783 is an aqueous light and moisture protection product for interior and protected exterior use. Absorbs the UV radiation responsible for the degradation of lignin and therefore delays darkening and greying of the wood. Protection from moisture. The hydrophobic effect reduces swelling and shrinkage of the wood. Especially suitable for lighter-coloured softwood species such as spruce, fir and pine.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Do not sand surfaces treated with UV protection, as this will destroy the UV protection.
Technical requirement:
Adhesive strength according to DIN EN ISO 2409; Gt 0.
| Volatile organic compound (VOC) | abt. 31 g/l |
|---|---|
| Tinting system | Largo |
| Theoretical spreading rate | 80 g/m²; 12.5 m²/kg |
| Density | abt. 1.03 g/ml |
| Drying time – dust free | after 60 minutes |
| Clean up | Wash the equipment immediately after use. Water, VERDÜNNER 1300-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |