MINOTOP AQUA 6760-10

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand

Stir or shake the product well for several minutes before use, if necessary by machine.

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.

Initial and maintenance care: After at least 3 weeks curing time with RENSA FLOOR POLISH 4580.

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Primed surfaces must be sealed within 48 hours. Please note: Avoid sanding through (staining!). As anhydrite or cement floors have different properties in terms of material composition, a preliminary test must always be carried out. (Determination of the required material quantity, etc.) The surfaces to be coated must comply with the structural engineering standards, they must be load-bearing, solid, non-slip and be free from intermediate layers (sintered skins, etc.) that interfere with bonding. The residual moisture (max. 0.5% without underfloor heating, max. 0.3% with underfloor heating, or according to applicable standards) must be measured and recorded. Turn off underfloor heating 30 hours before sealing. Floor coatings are generally dry after 24 hours and can be walked on. However, full load-bearing capacity (curing) is only guaranteed after 14-21 days (according to SIA 2535.7.4). Do not lay any carpets or other floor coverings or carry out any surface treatment beforehand. Sealing requires sound technical knowledge. Do not use in wetrooms.