FEYCO PERL 5377-15
Solvent-based, textured 2C top coat for interior use
- 2-component
- Solvent-borne
- Topcoat
FEYCO PERL 5377 is a particularly fast-drying, solvent-based, extremely scratch resistant, textured 2C top coat with excellent adhesion and high covering power. The product is resistant to mechanical stress. The coating is characterised by its medium texture.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil.
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Effect coatings should only be applied by air atomisation, e.g. with a gravity feed gun or a low-pressure double diaphragm pump.
Please refer to the instructions in the process data sheet "Large-area coatings with effect coatings" (VTM 4126).
| Volatile organic compound (VOC) | abt. 541 g/l |
|---|---|
| Pot life | 8 h (+23 °C) |
| Mixing ratio | 4:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 80 g/m²; 12.5 m²/kg |
| Density | abt. 1.11 g/ml |
| Drying time – dust free | after 20 minutes |
| Drying time – touch dry | after 30 minutes |
| Drying time – through-dry | after 10-14 days |
| Thinner | VERDÜNNER 0950-98 |
| Clean up | Wash the equipment immediately after use. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 15 |