AQUAFILLER 6500-01
Intermediate coat for flow coating / dipping
- Water-borne
- Intermediate
AQUAFILLER 6500-01, a water-borne industrial intermediate product for new wood designated for exterior use such as windows and doors.
AQUAFILLER 6500-01 can be applied by flow coat or dipping (manual or automated). Exterior durability of coating systems including AQUAFILLER 6500-01 is typically documented according to EN 927-2.
AQUAFILLER 6500-01 has pore-filling properties when treating hardwood.
Technical data sheet
Safety data sheet
Other product specific documents
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%.
Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016.
Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
Application conditions
Stir thoroughly before use.
Optimum temperature for products and surroundings: +18°C - +22°C.
Optimum relative air humidity: Approx. 50%.
Wet film range 75-100 µm.
Due to evaporation, the solid content of the liquid must be adjusted with water regularly.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
| Volatile organic compound (VOC) | abt. 28 g/l |
|---|---|
| Theoretical spreading rate | 10-13 m²/l |
| Clean up | Water. |
| Colours | Colourless. |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |