ALPOCRYL HR 5360-40
Solvent-based 2C enamel coating for interior use
- 2-component
- Solvent-borne
- Topcoat
ALPOCRYL HR 5360 is a particularly fast-drying, solvent-based, 2C enamel coating with excellent adhesion and high covering power. The coating is very weather-resistant and is also resistant to household chemicals and mechanical stress. The special IR-reflective composition reduces heating caused by solar radiation.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Relative air humidity max. 80%. The weather resistance rating applies to countries with Central European climate and up to 1000 metres altitude (m.a.s.l.).
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
PVC profiles: Please refer to the instructions in the process data sheet "Instructions for PVC profiles with ALPOCRYL DP 5520, HR 5360 and LE 5393" (VTM 2519).
Aluminium and galvanised substrates: ALPOTECT PRIMER 5162-00
Steel: ALPOTECT PHOSPHATGRUND 5100-00
| Volatile organic compound (VOC) | abt. 602 g/l |
|---|---|
| Pot life | 8 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 96 g/m²; 10.4 m²/kg |
| Density | abt. 1.16 g/ml |
| Drying time – dust free | after 10 minutes |
| Drying time – touch dry | after 30 minutes |
| Drying time – through-dry | after 10-14 days |
| Thinner | VERDÜNNER 1300-98, VERDÜNNER 0950-98. |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 40 |