1. Teknos Americas
  2. Consumer
  3. Products
  4. Product search
  5. TEKNOSPRO 5

TEKNOSPRO 5

Wall paint

»
  • Water-borne

Alkyd-reinforced acrylate dispersion paint for dry indoor spaces. Finish: full-matt. Low side sheen.

TEKNOSPRO 5 is used on interior walls and ceilings, e.g. in apartments and offices. TEKNOSPRO 5 is easy to apply and gives a smooth, matt surface with attractive appearance. It can be applied to concrete, plaster, filler, brick and to various building boards. It can also be used for repainting old alkyd and dispersion paint coats.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. For smoothing of irregularities in the surface choose a suitable filler from the TEKNOSPRO series. The dried filler is sanded down and the dust removed.

Application

Stir thoroughly before use. Apply once or twice.

Application conditions

The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Maintenance

The final forming of the film takes approx. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the surface must be treated with care. The surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. For very dirty surfaces can also alkalescent (pH 8 - 10) detergents be used. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.

Storage

Must not freeze.

Suitable airless nozzle size 0.017 - 0.021".
Solids abt. 38 % by volume
Volatile organic compound (VOC) EU VOC limit value (cat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Full-matt
Tinting system Teknomix
Density abt. 1.3 g/ml
Practical spreading rate Previously painted surface: 10 - 12 m²/l. Filler and wood fibre board: 7 - 10 m²/l. Concrete and plastered surface: 4 - 7 m²/l.
Drying time – dust free ½ h
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Colours Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card.
Packages Base paints 1 and 3: 0.9 l, 2.7 l, 9 l, 18 l. Availability varies by country.
Safety markings See safety data sheet.
Approvals & certificates M1 classification,Finnish Key Flag
Gloss value 17-23