FUTURA 40
Semigloss furniture paint
- Wear resistant
- Solvent-borne
Urethane alkyd paint that is thixotropic and therefore easy to apply. Finish: semigloss.
For top coating of wooden and primed metal surfaces on detached furniture both indoors and outdoors. Avoid using dark colours outdoors.
Technical data sheet
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Remove loose and poorly adherent paint coats. Wire-brush the rusty metal parts. Matt down hard or gloss surfaces by sanding and thereafter remove the dust.
Smooth any irregularities in the surface with SILORA A carpentry filler. The dried filler is sanded down and the dust removed.
Application
The paint is thixotropic and must be stirred thoroughly before use.
When a second coat is required, it can be applied on the following day.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%.
Suitable airless nozzle size 0.011 - 0.013".
Solids | abt. 53 % by volume |
---|---|
Volatile organic compound (VOC) | The product is not included in the EU VOC directive. |
Gloss | Semi-gloss |
Tinting system | Teknomix |
Density | abt. 1.3 g/ml |
Practical spreading rate | Applied once onto a smooth surface: 8 - 12 m²/l. |
Drying time – touch dry | 4 h |
Thinner | TEKNOSOLV 1621 (solvent naphtha) or in spray application TEKNOSOLV 9500. |
Clean up | TEKNOSOLV 1621 (solvent naphtha) or in spray application TEKNOSOLV 9500. |
Colours | Base paints 1 and 3. |
Packages | Base paints 1 and 3: 0.45 l, 0.9 l, 2.7 l, 9 l. |
Safety markings | See safety data sheet. NOTE! Because of the danger of spontaneous combustion, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended. |
Approvals & certificates | Finnish Key Flag |