1. Teknos Americas
  2. Consumer
  3. Products
  4. Product search
  5. SAKU

SAKU

Socle paint

»
  • Water-borne

SAKU is a dispersion paint for concrete surfaces.

Intended for painting socles and concrete buttresses. The paint has good resistance against the alkalinity of concrete and being "breathing" it allows moisture to escape from the concrete. The paint has CE approval for protection of concrete structures.

Surface preparation

CONCRETE SURFACES: Remove all dirt and old, flaking paint coats. Remove calcium salts by washing the surface with RENSA ETCHING Etching Liquid (diluted with water 1 : 2). After etching rinse the surface with water and let it dry. Do not paint the concrete until the seepage of calcium salts from the concrete has ceased. If the salt formation continues, e.g. due to inadequate damp-proofing, painting is not recommended. METAL PARTS: Clean galvanized surfaces from dirt and grease. Wire-brush rusty areas andvprime them with FERREX AQUA.

Application

Stir thoroughly before use. Reserve a sufficient amount of paint in the same vessel for each uniform surface. Colour differences will thus be avoided. Top coating with undiluted SAKU socle paint.

Application conditions

The temperature of the ambient air, the surface and the paint shall be at least +5 °C. Application can be done in damp weather, but this will lengthen the drying time.

Storage

Must not freeze.

Suitable airless nozzle size 0.017 - 0.021".
Solids abt. 38 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/c): 40 g/l. The product´s VOC: max. 40 g/l.
Gloss Matt
Tinting system Teknomix
Density abt. 1.3 g/ml
Practical spreading rate 3 - 6 m²/l.
Drying time – touch dry 30 min
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use. Wash away any splashes or stains of paint at once before they get dry.
Packages Base paints 1 and 3: 0,9 L, 2,7 L, 9 L.
Safety markings See safety data sheet.
Approvals & certificates CE marking,Finnish Key Flag