1. Teknos Americas
  2. Consumer
  3. Products
  4. Product search
  5. FERREX AQUA

FERREX AQUA

Anticorrosive paint

»
  • Corrosion protective
  • Special adhesion
  • Water-borne

FERREX AQUA is a water-borne anticorrosive pigmented anticorrosive paint and adhesion primer. Finish: semimatt. Anticorrosive paint and adhesion primer for iron and steel surfaces as well as aluminium outdoors and indoors. The adhesion of FERREX AQUA on zinc-coated (galvanized) surfaces as well as on prefabrication primers is also excellent.

The pigmentation of FERREX AQUA effectively prevents underfilm corrosion. FERREX AQUA can be overcoated with nearly all Teknos water- and solvent-borne paints for sheet-iron roofs, furniture and houses.

Surface preparation

Surfaces to be painted are cleaned from dirt, grease, oil and other impurities. RENSA STEEL washing agent, solvent wiping etc. is used for cleaning. Rust and corrosion are removed from the surfaces using scraping, wire-brushing, sanding, blast-cleaning or other suitable method. Old, glossy surfaces are roughened using sanding, blast-cleaning or other suitable method. Loose and poorly adherent old paint or coating is removed. Aluminium surfaces are roughened using sanding, blast-cleaning ot other suitable method.

Application

Stir thoroughly before use.

Application conditions

The surface to be treated must be dry. During the application and drying period (note also the temperature of the night following the application) the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%. If the temperature of the surface to be painted exceeds +40°C, the application properties and the adhesion of the paint may deteriorate.

Storage

Must not freeze.

Suitable airless nozzle size 0.011 - 0.015".
Solids abt. 42 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/i): 140 g/l. The product's VOC: max. 140 g/l.
Gloss Semi-matt
Density abt. 1.3 g/ml
Practical spreading rate 8 - 10 m²/l depending on application technique, substrate and the quality of surface.
Drying time – touch dry 3 h
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner.
Colours Grey (T1380) and white (T1326).
Packages 0.5 l, 1 l, 3 l, 10 l.
Safety markings See safety data sheet.
Approvals & certificates M1 classification,Finnish Key Flag