WENODUR STRUKTURLACK 3007-30
Solvent-based 2C top coat for interior use
- 2-component
- Solvent-borne
- Topcoat
WENODUR STRUKTURLACK 3007 / 3008 is a particularly fast-drying, solvent-based, textured 2C top coat with excellent adhesion and high covering power. The coating is very weather-resistant and is also resistant to household chemicals and mechanical stress. Texture types: 3007 coarse texture 3008 fine texture
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Application methods
Effect paints should only be applied using air atomization, e.g. with a gravity cup gun or a low-pressure double diaphragm pump.
Please note the procedural information sheet “Large-area painting with effect paints” (VTM 4126).
| Volatile organic compound (VOC) | abt. 566 g/l |
|---|---|
| Pot life | 6 h (+23 °C) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.14 g/ml |
| Mixing ratio by weight | 5:1 |
| Drying time – dust free | after 40 minutes |
| Drying time – touch dry | after 3 hours |
| Drying time – through-dry | after 10-14 days |
| Thinner | VERDÜNNER 1300-98, VERDÜNNER 0950-98. |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |