2. TIMANTTI 12

TIMANTTI 12

Wall paint

»
  • Water-borne

Water-borne acrylate paint for walls and ceilings indoors. Mildew-resistant. Finish: semi-matt.

Especially suited for use on walls and ceilings where good washability and abrasion resistance is required, in e.g. kitchens, bathrooms, halls and staircases in kindergartens, schools, hospitals, food processing facilities and similar spaces. TIMANTTI 12 can be applied to primed concrete, plaster, filler, brick and building board surfaces according to the painting directions. The paint is also suitable for repainting old alkyd and dispersion paint coats.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.

Application

Stir thoroughly before use.

Application conditions

The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Drying is faster in low air humidity and/or above +21°C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.

Maintenance

The final forming of the film takes approx. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the surface must be treated with care. The surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. For very dirty surfaces can also alkalescent (pH 8 - 10) detergents be used. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.

Storage

Must not freeze.

Application methods

Suitable airless nozzle size 0.017 - 0.021".
Solids abt. 38 % by volume
Volatile organic compound (VOC) EU VOC limit value (cat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Tinting system Teknomix
Theoretical spreading rate 8 m²/l.
Density abt. 1.3 g/ml
Practical spreading rate The quality of the substrate and the chosen application method affect the practical spreading rate.
Drying time – dust free 1 h
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Colours Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card. Ready-made shade: Off-white T1724 (T1327).
Packages Base paints 1 and 3: 9 l, 18 l. Off-white T1724 (T1327): 18 l.
Safety markings See safety data sheet.
Approvals & certificates M1 classification,Finnish Key Flag