TEMPO

Sand the wooden surface properly, finish with sandpaper n:o 100 or finer. Fill the gaps with GAP Parquet putty during the intersanding process. Apply TEMPO on the wooden surface after the final sanding with a stainless steel trowel, lacquer roller, felt trowel or a lacquer brush. Ensure that the lacquer has dried and intersand with, for example, abrasive net or sandpaper grit 120. If working with a steel trowel, apply two TEMPO coats with a steel trowel after intersanding and allow to dry thoroughly. After priming, finish with Teknos water-based parquet lacquer. Water-based primers may cause slight swelling of the wooden surface. If an absolutely smooth surface is desired, sand the surface lightly after the first lacquer coat. Ensure that the primer has fully dried before applying the top lacquer.

The surface to be varnished has to be dry. The moisture content of the wood should be 7 ±2 % by weight. The temperature of the air, the surface and the lacquer shall be above +18 - 24°C and the relative humidity of the air 40 - 60% during the time of application and drying.

Storage time: in unopened containers, above +1°C, for 1 year. MUST NOT FREEZE.