TEKNOCOAT AQUA SEALER 231-124
Waterborne pigmented sealer
- 1-component
- Water-borne
- Sealer
This product is recommended for industrial coating of wood-based substrates. This basecoat for roller application serves as a base for further coatings with TEKNOS waterborne printing inks and TEKNOS UV topcoats. By using the appropriate layer design and drying conditions, it is possible to achieve chemical resistance R4 / R7 according to IOS-MAT-0066.
Technical data sheet
Surface preparation
The application is normally effected during a direct coating process of wood-based substrates. Please consult our technical staff prior to other applications.
Application
Stir thoroughly before use.
Apply by roller coater, with a shore hardness of preferably 40 - 50 shore (Isobutylen/Isopren-Copolymer or EPDM-Prepolymer).
Intermediate drying after each layer is recommended.
Application conditions
The recommended application temperature is +20 – +35°C.
Storage
Storage and transportation temperature is +25 ± 5°C. Storage stability is 1 year in unopened package. Protect from heat and freeze!
Drying methods
Jet dryer i.e. IR-dryer.
Adjustment of drying parameters according to film weight and line speed is necessary. A preliminary test of the complete build-up is recommended.
| Volatile organic compound (VOC) | Approx. 14 ± 3 g/l (DIRECTIVE 2010/75/EU) The VOC value provided is the average value for factory produced products, and consequently it will be subject to variations between individual products covered by this Technical Data Sheet. |
|---|---|
| Thinner | If needed the product can be diluted with water. For the amount of dilution, please contact our technical service. |
| Clean up | Water. Wash the equipment immediately after use. |
| Safety markings | See safety data sheet. |