2. SILORA LG

SILORA LG

Light filler

»
  • Water-borne
  • Filler

Ready-to-use, water-borne filler with excellent filling capability.

Used for repair work and overall skimming of rough wall and ceiling surfaces in dry interior areas. The substrate can be gypsum, fibre board, concrete, lightweight concete, plaster etc.

SILORA LG has good filling capability.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Brittle surfaces and untreated wooden surfaces must be primed before the filler is applied.

Application

Apply the filler by trowel. The number of layers is dependent on the surface roughness. The use of protective mask for eyes and face is recommended when grinding the filler. Surfaces filled with SILORA LG must before further treatment be entirely skimmed over with a finer-graded filler to ensure better adhesion and a smoother surface.

Application conditions

The surface to be treated must be dry. The temperature of the air, the surface and the filler shall be above +5 °C and the relative humidity of the air below 80 % during the time of application and drying.

Storage

To be stored in a cool place. Must not freeze. Storage stability is 1 year in unopened package.
Solids abt. 56 % by volume
Volatile organic compound (VOC) The product is not included in the EU VOC directive.
Layer thickness 1 - 30 mm
Density abt. 0.8 g/ml
Particle size 0.3
Clean up Water
Colours Grey
Packages 10 l.
Safety markings See Safety Data Sheet.
Approvals & certificates CE marking,M1 classification