2. PARKETTGRUND 4510-00

PARKETTGRUND 4510-00

Water-soluble, grain-accentuating 1C parquet primer

»
  • 1-component
  • Water-borne
  • Primer

PARKETTGRUND 4510-00 is a water-soluble, highly elastic, grain-accentuating parquet primer. For perfect floor sealing on a completely aqueous basis. The coating is also suitable for tannin-rich woods such as oak. PARKETTGRUND 4510-00 reduces the tendency for side edge bonding and therefore lowers the risk of the formation of wide joint cracks (block cracks).

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.

Maintenance

For further information on products for treating the surfaces of wooden floors and their use please visit www.parkett-verband.ch.

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Application methods

For renovation, fumed oak and exotic wood species we recommend using PARKETT RENO GRUND 3300 instead of PARKETTGRUND 4510 for more effective sealing of the substrate. When using PARKETTGRUND 4510 as a primer, always use a separate roller.  PARKETTGRUND 4510 and parquet sealing coatings are not compatible with one another in a liquid state. Coagulates occur during mixing. Technical requirement: Adhesive strength according to DIN EN ISO 2409; Gt 0.
Volatile organic compound (VOC) abt. 31 g/l
Theoretical spreading rate 125 g/m²; 8 m²/kg
Density abt. 1.03 g/ml
Drying time – dust free after 60 minutes
Clean up Wash the equipment immediately after use. Water, VERDÜNNER 1000-98.
Colours Colourless.
Safety markings See safety data sheet.
Approvals & certificates EMICODE EC 1