2. OBJEKTSIEGEL 4555-15

OBJEKTSIEGEL 4555-15

Water-soluble 1C floor sealing coating for interior use

»
  • 1-component
  • Water-borne
  • Sealer

OBJEKTSIEGEL 4555 is a water-soluble, abrasion-resistant 1C floor sealing coating for low-emission, odourless treatment of wood parquet floors and stripped floor boards. The product is resistant to light and yellowing.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.

Maintenance

Initial and maintenance care: After at least 3 weeks curing time with RENSA FLOOR POLISH 4580. For more information on wood floor surface treatments and their use, visit www.parkett-verband.ch.

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Application methods

When renovating or coating exotic wood species, we recommend using RENO GRUND 3300. Do not use on pear wood without a primer. Risk of film formation faults. When using on dark woods please refer to the instructions in our VTM 5564 "White discolouration” in the areas around the joints of sealed dark wood floors.
Volatile organic compound (VOC) abt. 79 g/l
Theoretical spreading rate 120 g/m²; 8.3 m²/kg
Density abt. 1.02 g/ml
Drying time – dust free after 2 hours
Drying time – through-dry after 7 days
Clean up Wash the equipment immediately after use. Water, VERDÜNNER 1000-98.
Colours Colourless.
Safety markings See safety data sheet.
Approvals & certificates Swiss environmental label UE II, class C
Gloss value 15