KORRO E
Prefabrication primer
- Corrosion protective
- Weldable
- 2-component
- Solvent-borne
- Prefabrication primer
KORRO E is a two-pack prefabrication primer based on epoxy resin.
The paint is used as a temporary protection on blast-cleaned steel.
KORRO E is compatible with all types of paints excluding zinc rich paints. The paint has received approvals for welding by Det Norske Veritas, Lloyds Register of Shipping and Germanischer Lloyd and also certificate issued by the Finnish Institute for Occupational Health. KORRO E has a good resistance to heat, solvent and oils. Separate certificate of the oil resistance is available.
Technical data sheet
| Solids | abt. 33 % by volume |
|---|---|
| Total mass of solids | abt. 600 g/l |
| Volatile organic compound (VOC) | abt. 620 g/l |
| Pot life | 48 h (+23 °C) |
| Mixing ratio | 2:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: KORRO E HARDENER |
| Gloss | Matt |
| Drying time – dust free | after 1 - 2 min |
| Drying time – touch dry | after 3 min |
| Thinner | TEKNOSOLV 9514 (highly flammable) |
| Clean up | TEKNOSOLV 9514 or TEKNOSOLV 9506 |