AQUATOP 2920-04 - BASE T
Varnish
- Water-borne
- Varnish
Water-borne varnish based on alkyd and acrylic. Contains UV protector.
Use: Wooden windows and outer doors, plywood facade panels, laminated beams and noise barriers. AQUATOP 2920-04 varnish has excellent weather resistance. The varnish can also be used for top coating of press-impregnated wood. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Surface preparation
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016.
Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%. The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C.
Must not freeze.
| Solids | abt. 40 % by volume |
|---|---|
| Total mass of solids | abt. 430 g/l |
| Volatile organic compound (VOC) | abt. 29 g/l |
| Gloss | Semi-gloss |
| Tinting system | Teknomix |
| Theoretical spreading rate | 6.6 m²/l (wet film 150 µm, dry film 60 µm) |
| Drying time – dust free | 20 min |
| Drying time – touch dry | 30 min |
| Thinner | Water. |
| Clean up | Water. |
| Colours | Clear. |
| Safety markings | See safety data sheet. |