ALPOTECT PHOSPHATGRUND 5100-00
Solvent-based 2C-EP primer with active corrosion protection
- 2-component
- Solvent-borne
- Primer
ALPOTECT PHOSPHATGRUND 5100-00 is a solvent-based 2C-EP primer with active corrosion protection.
Technical data sheet
Safety data sheet
- ALPOTECT PHOSPHATGRUND 5100-00_2021-08-09_CZ_en
- ALPOTECT PHOSPHATGRUND 5100-00_2021-08-09_FI_en
- ALPOTECT PHOSPHATGRUND 5100-00_2021-08-09_GR_en
- ALPOTECT PHOSPHATGRUND 5100-00_2024-03-13_EU_en
- ALPOTECT PHOSPHATGRUND 5100-00_2024-03-13_IE_en
- ALPOTECT PHOSPHATGRUND 5100-00_2024-03-13_MT_en
- ALPOTECT PHOSPHATGRUND 5100-00_2024-03-13_NI_en
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Strip, sandblast Completely remove loose existing coatings, sand adhering existing coatings well.
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Application methods
For hot-dip galvanised substrates, allow the primer to dry for at least 12 hours before overcoating.
| Pot life | 8 h (+23 °C) |
|---|---|
| Hardener | Comp. B: ALPOTECT 5103-99 |
| Theoretical spreading rate | 100-120 g/m²; 9.0 m²/kg |
| Density | abt. 1.433 g/ml |
| Mixing ratio by weight | 5:1 |
| Drying time – dust free | after 30 (20) minutes |
| Drying time – touch dry | after 180 (60) minutes |
| Drying time – through-dry | after 12 (8) hours |
| Thinner | ALPOTECT 3000-98 |
| Clean up | Wash the equipment immediately after use. UNIVERSALREINIGER U 8600-98 or ALPOTECT 3000-98. |
| Colours | Certain colours are delivered from stock. |
| Safety markings | See safety data sheet. |