2. ALPOCRYL LE 5393-40

ALPOCRYL LE 5393-40

Solvent-based 2C enamel coating for interior use

»
  • 2-component
  • Solvent-borne
  • Topcoat

ALPOCRYL LE 5393-40 is a particularly fast-drying, solvent-based, satin-gloss 2C enamel coating with excellent adhesion and high covering power. The coating is very weather-resistant and is also resistant to household chemicals and mechanical stress. ALPOCRYL LE 5393-40 can also be used for ship interiors. The product can also be processed on spraying lines with forced drying.

When used as a flame retardant coating for seagoing ships according to SOLAS (International Convention for the Safety of Life at Sea) 74/88 Reg. II-2/3, II-2/5 and II-2/6, latest version, IMO Resolution MSC.36(63)-(1994 HSC Code)7, IMO Resolution MSC.97(73)-(2000 HSC Code)7, this product can only be combined with other approved and technically suitable products. A risk assessment has been carried out according to Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating poses neither a physical nor a health hazard, nor a hazard to the environment. When used in ship interiors, the maximum total product application quantity of 150 g/m² should never be exceeded.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Relative air humidity max. 80%. The weather resistance rating applies to countries with Central European climate and up to 1000 metres altitude (m.a.s.l.).

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Mixing of the components

10:1 (varnish to hardener, by volume.)

Application methods

Note: When applying a white or pastel-coloured coating to surfaces subject to considerable wear we recommend overcoating with 2C clear coatings to improve ring resistance (metal wear). On MDF boards with a density of below 700 kg/m³ the surface must be pre-isolated with ALPOLAN UNIVERSALGRUND 2420-00. Strengthen the edges or milled grooves with ALPOLAN UNIVERSALGRUND 2420-00. Moisture-resistant wood based materials must be used for rooms with a high moisture exposure (e.g. kitchens, bathrooms etc.). This product should not be used on horizontal surfaces in these areas.
Volatile organic compound (VOC) abt. 650 g/l
Pot life 8 h (+23 °C)
Mixing ratio 10:1 by volume (comp. A : comp. B)
Hardener Comp. B: UNIPUR 279 1910-99
Tinting system Largo
Theoretical spreading rate 120 g/m²; 8.3 m²/kg
Density abt. 1.16 g/ml
Drying time – dust free after 10 minutes
Drying time – touch dry after 30 minutes
Drying time – through-dry after 10-14 days
Thinner VERDÜNNER 1300-98, VERDÜNNER 0950-98, VERDÜNNER 5600-98, VERDÜNNER 5500-98.
Clean up Wash the equipment immediately after use. VERDÜNNER 0950-98 or UNIVERSALREINIGER U 8600-98.
Colours Available in all RAL and NCS-S colours or at your request.
Safety markings See safety data sheet.
Approvals & certificates EN 13501-1,IMO FTPC Part 5,Marine Equipment Approval (Module B)
Gloss value 40