VELLAMO FILL 8700-00

Water-borne 1C filler for interior use

  • 1-component
  • Water-borne
  • Filler

VELLAMO FILL 8700-00 is a water-borne, fast-drying, thixotropic filler with a high solids content, good isolating and excellent filling properties as well as very good sandability (even after three weeks). As it is particularly viscous, the product is especially suitable for applications on vertical surfaces.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 70%.

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Application methods

Supplied viscosity: 30-35s DIN6 Caution Material is thixotropic! Adhesion to MDF raw, spruce, beech, oak, Sipo - GT: 0
Volatile organic compound (VOC) abt. 50 g/l
Tinting system Teknomix
Theoretical spreading rate 200 g/m; 5 m/kg
Density abt. 1.335 g/ml
Drying time – dust free after 30 minutes
Drying time – touch dry after 60 minutes
Drying time – through-dry after 24 hours
Clean up Wash the equipment immediately after use. Water, SPEZIALVERDÜNNER 1020-98.
Colours White.
Safety markings See safety data sheet.