TIMANTTI STOP

Clean the surface from dirt and dust as well as possible. Wash water-resistant dirty surfaces with RENSA SUPER paint cleaner. Remove loose and poorly adherent coats of old paint. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. TIMANTTI STOP is a water-borne paint. Coatings, which are not waterproof, such as old unpainted ceiling stopper or glue paint coats, must be removed before applying TIMANTTI STOP. Alternatively FUTURA 3 adhesion primer can be used as an insulation primer.

Before use stir the paint thoroughly. The paint can be diluted with water, if required, but dilution may impair the insulation capability and the coverage of the paint. Apply once or twice by brush, roller or spray. Recommended nozzle size for airless spray is 0.013 - 0.017". Surfaces insulation primed with TIMANTTI STOP can be top coated with all Teknos interior paints which otherwise suit the object in question. TIMANTTI STOP is white and full-matt and hence can be used also as a top coat e.g. on ceilings.

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Drying is faster in low air humidity and/or above + 21 °C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.

Must not freeze.