2. SALAMAA BLACKBOARD

SALAMAA BLACKBOARD

Blackboard paint

»
  • Water-borne

Matt water-borne tintable blackboard paint for indoor use. Can be applied to doors, detached and fixed furniture and to e.g. walls. Ideal application properties. Excellent scratch and wear resistance as well as washability: Drawings made with a chalk can easily be wiped off with a damp sponge. The product has been classified to Group M1 in Emission Classification of building materials. Product meets the requirements of toy safety standard EN 71-3:2019 for limit values for migration of chemical elements.

SALAMAA BLACKBOARD is suitable for primed and previously painted wood, metal and building board surfaces: doors, cabinets and panels as well as e.g. smooth wall surfaces (coarse structure caused by roller application may hinder the washability of the surface).

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with SILORA A carpentry filler.

Application

Stir thoroughly before use. Apply the paint once or twice with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. Suitable airless nozzle size 0.011 - 0.013".

Application conditions

The surface must be clean and dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%. Drying is faster in low air humidity and/or above + 21°C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.

Storage

Must not freeze.
Solids abt. 40 % by volume
Volatile organic compound (VOC) EU VOC limit value (cat A/d): 130 g/l. The product's VOC: max. 130 g/l.
Gloss Matt
Tinting system Teknomix
Density abt. 1.2 g/ml
Practical spreading rate 8 - 10 m²/l.
Drying time – dust free 1 h
Drying time – through-dry 2 - 3 days
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Colours Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card.
Packages Base paints 1 and 3: 0.9 l.
Safety markings See safety data sheet.
Approvals & certificates M1 classification