PANEELILAKKA
Panel Varnish
- UV resistant
- Water-borne
- Varnish
PANEELILAKKA Panel Varnish is a water-based nearly odourless dispersion varnish that contains agents that protect against ultraviolet light.
Especially suitable for varnishing panelled walls and ceilings. Is also suitable for use on chipboard walls and ceilings. The varnish is not recommended for floors, parquets or furniture.
Technical data sheet
Surface preparation
Remove grease and dirt. Matt down old, intact varnished surface by sanding. If the varnished surface is flaking, remove it by sanding.
Application
Stir the varnish carefully down to the bottom of the can. Apply the varnish twice along the direction of the wood grain. After the first application the surface can be lightly sanded to remove uplifted wood fibers. For the first application the varnish can be diluted with water. The second application is done with undiluted varnish.
Application conditions
During the varnishing and drying period the temperature of the ambient air, the surface and the varnish shall be above +10 °C and the relative air humidity below 80 %.
Storage
Must not freeze.
| Solids | abt. 33 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (kat A/e): 130 g/l 2010. The product's VOC: max. 130 g/l. |
| Gloss | Semi-matt |
| Tinting system | Teknomix |
| Drying time – dust free | after ½ hour |
| Thinner | Water. |
| Clean up | Wash the equipment immediately after use with detergent and warm water. |
| Safety markings | See Safety Data Sheet. |
| Approvals & certificates | Finnish Key Flag |
| Gloss value | 18-24 |