INERTA 700
Polyurethane coating
INERTA 700 Polyurethane Coating is a two-pack solvent-free polyurethane coating.
Used for coating wagons that are used for transporting fertilizers, coal and ore. The product can be used also for coating concrete safety basins.
INERTA 700 endures impacts, hard abrasion, chemicals and constant submerging in water. It will also cure in -5°C temperature. The crack bridging ability of a 2 mm INERTA 700 layer on concrete is 1.9 mm (standard EN 1062-7, method A). The coating is applied to 500 - 2000 µm thickness. The product has CE approval for protection of concrete structures.
Technical data sheet
Safety data sheet
Other product specific documents
| Solids | abt. 100 % by volume |
|---|---|
| Total mass of solids | abt. 1300 g/l |
| Volatile organic compound (VOC) | abt. 0 g/l |
| Pot life | 20 min. (+23 °C) |
| Mixing ratio | 3:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: INERTA 700 HARDENER |
| Gloss | Gloss |
| Drying time – dust free | after about 2 h |
| Drying time – touch dry | after about 4 h |
| Drying time – fully cured | after about 7 d |
| Thinner | TEKNOSOLV 9521 |
| Clean up | TEKNOCLEAN 6496 |
| Approvals & certificates | CE marking |