ANTISTAIN AQUA 5200-00
Primer for spray application
- Water-borne
- Primer
ANTISTAIN AQUA 5200-00, a water-borne industrial primer for new wood designated for exterior use such as windows and doors.
ANTISTAIN AQUA 5200-00 can be applied by Airmix or Airless spraying systems either by hand or in automated spraying facilities. ANTISTAIN AQUA 5200-00 will typically be applied on softwood, which has been pretreated with a Wood Preservative. Exterior durability of coating systems including ANTISTAIN AQUA 5200-00 is typically documented according to EN 927-2.
ANTISTAIN AQUA 5200-00 minimises yellowing from knots and softwood with a large amount of heartwood.
Technical data sheet
Safety data sheet
Other product specific documents
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%.
Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016.
Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
Application conditions
Stir thoroughly before use.
Optimum temperature for products and surroundings: +18°C - +22°C.
Optimum relative air humidity: Approx. 50%.
Wet film range 125-200 µm.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
| Solids | abt. 32 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 7 g/l |
| Tinting system | Teknocolor |
| Theoretical spreading rate | 5-8 m²/l |
| Clean up | Water. |
| Colours | White and antique white. Base 3 (opaque colours). |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |