TEKNOPOX PRIMER 7-00 MIOX

Z povrchu odstraňte veškeré nečistoty, které by mohly být překážkou pro přípravu povrchu a aplikaci. Remove also water-soluble salts by using appropriate methods. The surfaces are prepared according to the different materials as follows: OCELOVÉ POVRCHY: Remove mill scale and rust by blast cleaning to preparation grade Sa 2½ (standard ISO 8501-1). OLD PAINTED SURFACES SUITABLE FOR OVERCOATING: Any impurities that might be detrimental to the application of paint (e.g. grease and salts) are removed. The surfaces must be dry and clean. Old, painted surfaces that have exceeded the maximum overcoating time are to be roughened as well. Damaged parts are prepared in accordance with the requirements of the substrate and the maintenance coating. The place and time of the preparation are to be chosen so that the prepared surface will not get dirty or damp before the subsequent treatment. Další pokyny pro přípravu povrchu lze nalézt v normách EN ISO 12944-4 a ISO 8501-2.

Take into consideration the pot life of the mixture when estimating the amount to be mixed at a time. Before application the base and hardener are mixed in right proportion. Stir thoroughly down to the bottom of the vessel. Mixing by machine is recommended, for example a slow-rotating hand-drill equipped with a mixer. Inadequate stirring or incorrect mixing ratio results in imperfect curing and impaired film properties. Airless spray parameter: Nozzle size 0,013 - 0,017". When preparing painting specification, depending on subject and type of construction, different dry film thickness than recommended can be assumed. Different dry film thickness than recommended causes change in theoretical spreading rate, wet film thickness, weight of dry film thickness, drying time, overcoating time and ready for handling time.

Skladovatelnost je uvedena na štítku. Store in a cool place and in tightly closed containers.