EPINOX 87

Před čištěním povrchu se doporučuje omýt jej vodou s přídavkem přípravku OLICLEAN 123 a poté opláchnout vodou. The surfaces are prepared according to the different materials as follows: OCELOVÉ POVRCHY: Další pokyny pro přípravu povrchu lze nalézt v normách EN ISO 12944-4 a ISO 8501-2.

Take into consideration the pot life of the mixture when estimating the amount to be mixed at a time. Before application the base and hardener are mixed in right proportion. Stir thoroughly down to the bottom of the vessel. Mixing by machine is recommended, for example a slow-rotating hand-drill equipped with a mixer. Inadequate stirring or incorrect mixing ratio results in imperfect curing and impaired film properties. Apply by airless spray or brush. Airless spray parameter: Nozzle size When preparing painting specification, depending on subject and type of construction, different dry film thickness than recommended can be assumed. Different dry film thickness than recommended causes change in theoretical spreading rate, wet film thickness, weight of dry film thickness, drying time, overcoating time and ready for handling time. In high corrosive environment it is recommended to prepare surface as best as possible and to apply successive layers of paint before full curing of previous layers to achieve best protection. It should be remembered that increasing the degree of cleanliness of the substrate extends the durability of the paint coating.

Skladovatelnost je uvedena na štítku. Store in a cool place and in tightly closed containers.